SF1

• Anti-impact technopolymer case. This composition allows a great lightness, resistance to the blows, and to the aesthetic aging. The computer case is extremely flat, with a very hydrodynamic cornerless section and its dimensions are relatively contained, with a vision of the model digits.
• Extra-flat profile (maximum height 14 mm) with a completely rounded design, very hydrodynamic and avoids possible snagging. Even the anchorage of the strap follows the profile of the box.
• Two highly integrated low-profile pushbuttons with a minimised backlash to ensure that the O-rings are watertight when working perfectly perpendicularly and to prevent the entry of particles or small grains of sand that could block them.
• Case diameter only 48 mm.
• Large screen UFDS (User-Friendly Display System) 38 mm in diameter vs 48 mm total box. The distribution of the information, screen contrast, proportions, and size of the digits have been studied to facilitate the reading. All data are segmented with slight separation lines that facilitate reading even in a stressful or emergency situation.
• New high-performance, low-power processor. It allows much faster data processing, more power backlighting, and sound alarms and doubles the battery life compared to previous models. CPU ARM Cortex M3 32 bit | Frequency14 MHz | Flash Memory 256 Kb | 32 Kb RAM.
• High intensity backlit display by push-button or in case of alarm (5 seconds per push)
• High-strength mineral crystal display.
• Guaranteed resistance up to 120 m depth.
• Optional Bluetooth interface.
• Thermoplastic rubber strap with stainless steel buckle.

• Intuitive new menu navigation system and parameter input for maximum usability. The ease of configuration, navigation through the different menus, and access to a large amount of information is always very intuitive.
• Clock 12/24 hours with calendar and seconds.
• Precision chronometer.
• Alarm Clock.
• High-intensity backlight function (4000 Mlux, more than twice the number of computers with the highest illumination power to date).
• Indication of no-fly time and desaturation time.
• Low battery indicator.
• Metric or imperial units.
• User-replaceable battery.
• OFF MODE for use in snorkeling/swimming.
• LOGBOOK with the historical memory of 50 dives per mode or 40 hours
• Air, Nitrox (EAN), Gauge, and Free modes.
• Extremely long battery life through a combination of systems: economy mode when not using the computer with automatic start and a new low-power processor. CR2450 Battery
• Dive Session Software Interface with connection to the dive computer simply supporting the computer and connection to the PC with the USB cable. The software is compatible with all Windows and Mac versions.
• Depth gauge calibrated in saltwater for maximum accuracy in the most common use.
• Possibility of deactivating DIVE functions to avoid unnecessary alarms during snorkeling or swimming

• Polyvalent Air/Nitrox.
• Possibility of using two different mixtures in the same immersion, 1st mix from 21% to 50%, 2nd mix from 21% to 99% O₂with 1% increments.
• Modified RGBM Wienke 9 tissue algorithm.
• RGBM algorithm + Deep Stop (optional).
• Customizable algorithm in 3 levels (Safety factor: SF0, SF1, SF2).
• Allows successive dives with different mixtures.
• Graphical oxygen indicator CNS toxicity.
• PLAN mode (dive planning).
• PP02 adjustable from 1,2 to 1,6.
• Logbook: 50 dives per modality or 40 hours.
• Ascent speed with graphic indicator and visual and acoustic alarms.
• Predefinable altitude.
• Acoustic, visual, and screen illuminated alarms: PO₂, CNS, ascent rate, DECO, DECO skipped, maximum depth exceeded (optional).
• Calibrated in saltwater for maximum accuracy.
• NO DEC TIME and DEC TIME.
• Optional safety stop ("Stop") in case of dives in the safety curve.
• Approximate autonomy of 4 years (50 dives per year).
• Temperature, time, instant PO2, maximum depth allowed, and mix used visible underwater at the press of a button.
• High power backlit display (one-touch, 5 seconds).
• Reset option via the menu. Eliminates residual nitrogen memory for use in dive centers for rental or teaching.
• Time display during the dive.
• Possibility of silencing ascent rate alarms.

• Studied to provide the necessary basic parameters for diving with mixtures with decompression tables calculated by specific programs.
• Calibrated depth gauge in saltwater (maximum precision).
• Provision of the current depth, maximum depth, dive time in minutes and seconds, and temperature.
• Logbook of 50 dives independent of the dives carried out in "Gauge" mode
• Average depth.
• The stopwatch can also be reset underwater.

• Depth
• Temperature
• Descent counter
• Maximum immersion depth
• Duration of the descent
• Surface interval from previous descent
• Duration of the session
• Depth, dive time, surface time alarm
• Recovery time with alarm
• Indication of time during immersion
• Chronometer for static apnea
• Logbook of 50 downloads per day

An elegant expression of simple, functional design, the Donatello is a must-have for divers entering the sport and for those who "just want to dive". It is a completely modular, rugged computer with a wide UFDS display, which provides the proverbial ease of navigation and Cressi computer menus. It has complete Nitrox management, depth gauge mode, and a reset option. The algorithm incorporates RGBM and Deep Stop. Menus and navigation system identical to the rest of the Cressi diving computers, with ease of reading, access to information and model parameter modification. A single button interface makes it effortless to set Air, Nitrox, Gauge and Free mode. The first time a diver picks the computer up, and an edge-to-edge, high-definition screen gives large numerical displays in a computer that is still compact and travel-friendly. Easy configuration, navigation through the various menus and access to a large amount of information displayed intuitively. Features a “User-Friendly Display System”: the information display, screen contrast, proportions and digit size have been carefully chosen for ease of use. All of the information presented is separated by light lines to facilitate reading even in stressful or emergency situations. Back-lit display activated by a button or when the alarm sounds. Extended battery life through a combination of systems: battery saver mode when the computer is not used with automatic power-on. Power-saving processor and CR2430 battery replaceable by the user without tools. The clearly visible battery life indicator and distinct audible alarms deliver critical information as well as peace-of-mind during the dive. The interface (not included) uses IR to connect to the diving computer and a USB cable for PC connection. Software compatible with all versions of Windows and with Mac. Gauge calibrated in salt water for maximum precision during typical use. The Donatello can also be fully reset after each use, making it possible to give to another diver.

Cressi Elettronica has developed our newest computer, the Goa, from scratch. It features a new CPU that is faster with greater functionality. Our latest motherboard is completely redesigned, allowing for a larger battery for long-lasting life. The case has a diameter of only 48 mm | 1 7/8 in and a high contrast display of 35 mm | 1 3/8 in. The computer monitor is made of mineral glass and the case is heavy duty with steel buttons that have an underwater resistance up to 120 m | 393 ft. Plastic/Steel bezel and stainless steel back cover. It has only 2 buttons making the menu easy to navigate. It not only features programs for scuba diving, but also has a program for free diving, in which it is possible to customize different alarms. It is also an ideal watch for other underwater activities due to the deactivation option of the dive functions that avoid unnecessary alarms while snorkeling or swimming. Data is acquired 4 times faster: every 5 seconds while scuba diving and every 2 seconds while free diving. Additionally, the computer acquires temperature data. The result is a more complete and precise chart that is viewable in the interface software. Through the Cressi Interface application (sold apart), a user can download and analyze the diving data recorded on the Goa. The connection between the Goa and PC (or MAC) is done using the Docking Station connected via USB cable. The Interface software allows the user to view charts and data of scuba diving and freediving sessions. It is possible to save a logbook with a memory of 50 dives per category. The records are completed with two graphs, showing the water pressure data (taken every 5 seconds) and water temperature data (taken every 5 seconds). All the information can be uploaded to the DAN (Divers Alert Network).